a国产三级后韩国-a级a片少妇高潮喷水片-a级成人免费毛片完整-a级成人婬片免费看-a级大片免费观看-a级国产电影在线观看

The basic method to determine the forging temperature range of forgings is based on the balance diagram of steel, and then refer to the plasticity diagram, resistance diagram and recrystallization diagram of steel. Through comprehensive analysis of plasticity, quality and deformation resistance, the initial forging temperature and terminal forging temperature are determined. Generally speaking, the forging temperature range of carbon steel can be directly determined according to the iron carbon balance diagram. The forging temperature range of most alloy structural steels can be considered with reference to most carbon steels with the same carbon content. However, for high alloy indium with low plasticity and steel without phase transformation, a reasonable forging temperature range must be determined through experiments. Let's follow the small series of heavy truck half shaft sleeve manufacturers to have a simple understanding and have a look!

- Determination of initial forging temperature

To determine the initial forging temperature of steel, it is necessary to ensure that the steel is not over burned. In addition, factors such as blank structure, forging method and deformation process should also be considered. For example, when ingots are used as billets, the trend of over combustion is small because the as cast structure is relatively stable. Therefore, the initial forging temperature of the ingot is 20-50 ° C higher than that of the same billet and steel. When high-speed hammer precision forging is used, because high-speed deformation will produce great thermal effect, the temperature of blank will rise and cause excessive combustion. Therefore, the initial forging temperature should be about 10 ° C lower than the normal initial forging temperature.

II. Determination of final forging temperature

When determining the terminal forging temperature, it is necessary to ensure that the steel has sufficient plasticity before terminal forging, and make the forging obtain good microstructure and properties. Therefore, the terminal temperature of steel should be higher than the recrystallization temperature to ensure complete recrystallization after forging, so that fine grain structure can be obtained by forging. The forging temperature range of various steels varies greatly. Generally, the forging temperature range of carbon steel is wide, up to 400 ~ 580 ° C.